Product Description
2-610 Dual Channel Tube Preamplifier
The Universal Audio 2-610 is based on the legendary Universal Audio 610 modular console. Designed by Bill Putnam, the Universal Audio 610 was among the first modular recording consoles. Early Universal Audio consoles were used in all of Putnam's studios including Universal Recording in Chicago and United/Western in Los Angeles. Many prominent engineers such as Bruce Swedien began their careers in these studios with this classic rotary knob console. The 610 was particularly well noted for its preamplifier, and has left its mark on countless classic recordings from Frank Sinatra to Van Halen, to the seminal Brian Wilson recording, Pet Sounds.
The 2-610 has been updated for 2007 with enhanced features and build quality, and a new cosmetic treatment. At user’s requests, the 2-610 has the extended top end shared by its cousins, plus a -15 dB pad. In addition, the 2-610 has improved stability in the feedback design of the shelf filters as well as an improved power supply. UA's expertise in analog design translates into a classic tube preamplifier with all of the character of its vintage predecessor, yet designed for the requirements and rigor of the modern studio. Whether you're running pure analog or seeking to enhance your digital audio workstation, the 2-610 will bring classic tube character to your recording.
The Universal Audio 2-610 is based on the legendary Universal Audio 610 modular console. Designed by Bill Putnam, the Universal Audio 610 was among the first modular recording consoles. Early Universal Audio consoles were used in all of Putnam's studios including Universal Recording in Chicago and United/Western in Los Angeles. Many prominent engineers such as Bruce Swedien began their careers in these studios with this classic rotary knob console. The 610 was particularly well noted for its preamplifier, and has left its mark on countless classic recordings from Frank Sinatra to Van Halen, to the seminal Brian Wilson recording, Pet Sounds.
The 2-610 has been updated for 2007 with enhanced features and build quality, and a new cosmetic treatment. At user’s requests, the 2-610 has the extended top end shared by its cousins, plus a -15 dB pad. In addition, the 2-610 has improved stability in the feedback design of the shelf filters as well as an improved power supply. UA's expertise in analog design translates into a classic tube preamplifier with all of the character of its vintage predecessor, yet designed for the requirements and rigor of the modern studio. Whether you're running pure analog or seeking to enhance your digital audio workstation, the 2-610 will bring classic tube character to your recording.
- Classic Sound of the Legendary 610 Modular Console
- Variable Gain and Output Levels, Multiple Impendence Settings
- Mic, balanced line and Hi-Z inputs
- High and Low shelving EQ
- Updated “silverface” cosmetics & enhanced build quality
- Improved EQ circuit and more “open” sonics as requested by users
- New switchable -15dB pad as requested by users
- Ultra quiet operation
- Custom wound double sized alloy transformers
Microphone Input Impedance
- Selectable, 500Ω or 2kΩ
Balanced Line Input Impedance
- 13.8 kΩ
Hi-Z Input Impedance
- Selectable between 2.2 MΩ or 47 kΩ
Maximum Microphone Input Level
- +3.5dBu
Maximum Output Level
- +20dBm
Internal Output Impedance
- 60 ohms
Recommended Minimum Load
- 600 ohms
Frequency Response
- 20Hz to 20kHz ±1 dB
Max Gain
- 61 dB
Signal to Noise Ratio
- Greater than 82 dB
Tube Complement
- (1) 12AX7A and (1) 12AT7 per channel
Power Requirements
- 115/230 volts
Power Consumption
- 30 watts
Weight
- 12.25 lbs.
Dimensions
- 19"W x 3.5"H x 12.25"D
- (19" Rackmount chassis, 2U)
There are no demos at this time.
Web
Support for Universal Audio products can be found on their website at http://www.uaudio.com/menu/support.html.
No Accessories for this product
Customer Reviews














