You have no items in your shopping cart.

PreSonus Eureka 1 Channel Preamp, Compressor, EQ

  • Retail Price $699.95
  • You Save $200.00
  • Shipping from Add to Cart
  • Availability In Stock
$499.95
Similar Items

More Views

Product Description

The Eureka Pro Recording Channel


The Eureka is a professional recording channel strip containing a discrete class A transformer-coupled microphone preamplifier, compressor, and three-band parametric equalizer. The microphone preamplifier features variable input impedance so that the Eureka can be matched and "tuned" for all types of microphones and recording applications. The Class A transformer-coupled microphone preamplifier also features "SATURATE" which adjusts the drain current on the input FET amplifier to simulate of the effects of tape saturation and tube "warmth".

The Eureka's ultra fast compressor has both soft and hard knee compression as well as a separate make up gain stage and hi-pass side chain compression to deliver hard pumping to ultra transparent compression and everything in between. The Eureka's three-band fully parametric EQ gives you variable Q (bandwidth) on each band as well as an EQ pre COMP switch to put the EQ before the Compressor in the signal path. The equalizer has overlapping frequency selection on each band for total tonal control and shaping.

The Eureka is loaded with microphone, line and instrument input so you can use it as a front end preamplifier for recording with microphones, guitars, keyboards, synths as well as a compressor/equalizer on a single channel during mixdown. The Eureka also has balanced send and return jacks so that you can insert your favorite outboard processor before the compressor/EQ to further enhance and customize your sound.

An optional 24 Bit/192kHz digital output card (AD192) is available for the Eureka to further optimize sonic performance. The Eureka's AD192 digital output card is loaded with both SPDIF and AES/EBU outputs, word clock I/O as well as a balanced TRS line input so that only one output card is necessary when using two Eureka's in stereo or dual mono situations.

The Eureka gives you the sonic performance and control you need in the real-world to produce professional quality audio that you, your customers and your fans deserve!

Features


  • Class A High Headroom Transformer Coupled Microphone Preamplifier
  • Variable Microphone Input Impedance
  • Variable SATURATE control (simulates tape saturation and tube warmth)
  • Fully Variable Compressor with Hi-pass Side Chain
  • Three Band Fully Parametric Equalizer
  • EQ Pre or Post Compressor
  • High Headroom Output Section
  • Very Low Noise Design
  • Internal Power Supply
  • Transparent, wide range performance
  • Optional 24-Bit/192k Digital Output Card (AD192)
Channels One
Dynamic Range >115dB
Headroom +22dB
Frequency Response 10Hz to 50kHz
Internal Operating Level 0dBu = 0B

 

Microphone Preamp

Input Impedance, XLR Input 1.3k Ohms
Input Impedance, Line Level Input 10k Ohms
Connectors Neutrik™ Combo

 

Microphone Preamp

Gain +12dB to +52dB
Noise Floor -112dBu (+12dB gain)
EIN -127dB
THD + Noise (0% saturation) <0.005%
THD + Noise (full saturation) <0.5%
Microphone Input Connector XLR
Microphone Input Impedance (selectable) 2.5k, 1.5k, 600, 150, 50 Ohms
Instrument Input Connector 1/4" TS
Instrument Input Impedance 1 Meg Ohm
Send Connector 1/4" TRS balanced/unbalanced
Send Output Impedance 51 Ohms
Return Connector 1/4" TRS balanced/unbalanced
Return Input Impedance 10k Ohms
Metering (3-LED) -20dBu, 0dBu, Clip
Line Input (switchable) 1/4" TRS, 10k Ohm Input Impedance
Phantom Power (switchable) +48V (pin 1, pin 2 XLR)
Pad (switchable) 0dB/-20dB
Phase (switchable) 0, 180 degrees
Hi-pass filter (switchable) -3dB shelf at 80Hz

 

Compressor

Threshold (variable) -40dBu to +20dBu
Ratio (variable) 1-10 (1:1 to 2:1)
Attack (variable) 0.1 to 200 ms
Release (variable) 0.05 ms to 3 S
Gain Make-up -20dB to +20 dB
Hi-pass Side Chain Filter (variable) 10Hz to 10kHz
Metering Analog VU (gain reduction / Output Level)

 

Equalizer

Low Band (+/-13dB) 20Hz to 300Hz
Mid Band (+/-13dB) 200Hz to 3kHz
High Band (+/-13dB) 2kHz to 20kHz
Q (variable all bands) Q=0.4 to 2 (3 octave to 2/3 octave)

 

Master

Output Fader -70dB to +10dB
Output Connectors XLR balanced and 1/4" TRS balanced/unbalanced
Output Impedance 51 Oms
Metering (output level) Analog VU (-20dBu to +6dBu)
Meter (gain reduction) Analog VU (-20dB to 0dB)
Output Headroom +22dBu

 

Physical

Power Supply Internally Regulated Linear Type
Power Requirements (factory configured) 100VAC to 120VAC, 200VAC to 240VAC
Size 1U Rack
Dimensions 19" x 1.75" x 7"
Weight 8lbs.

 

AD192 - Optional Digital Output Card

Bit Resolution up to 24-Bit
Sample Rates Supported 44.1, 48, 88.2, 96, 176.4, 192
Word Clock In / Out via BNC Connector
Supported Digital Formats Professional, Consumer
Simultaneous Digital Ouputs AES/EBU and SPDIF
Analog Line Input (one AD192 card supports two Eureka's) 1/4" Balanced TRS
THD + N 0.002 %
Signal to Noise Ratio 114 dB
Dynamic Range 114 dB

 

See video clip above.

Web


Support for PreSonus hardware and software can be found at the PreSonus Forums.

You may also be interested in the following product(s)

Add to Cart PreSonus FireStudio Firewire Interface

PreSonus FireStudio Firewire Interface

Regular Price: $769.95

Special Price: $599.95