You have no items in your shopping cart.

Avantone CK-7 Multi-Pattern FET Microphone

  • Shipping from Add to Cart
  • Availability In Stock

More Views

Product Description

The CK-7 is a multi-pattern FET (transistor) condenser mic suitable for pretty much everything. Cardioid, Omni, and Figure-8 patterns are all accessible with a built-in switch and this mic can handle a maximum 139 dB SPL (sound pressure level), so you really can mic anything with great results.

Use the CK-7 for vocals, acoustic instruments, drums, overhead or room mic, piano, etc. This is one of the best and most versatile condenser mics you’ll find at this (or much higher) price, so grab one for your studio today. Make sure you have a spare mic stand, because chances are you’ll end up “storing” it on a stand for ready-to-grab-at-any-time use rather than in your mic closet.

Avant uses high-grade Polystyrene and Metalized Polypropylene capacitors on these mics, stock, which is noteworthy because traditionally these high-end materials are added to other mics as an after-market modification, not built-in on the stock models. Avant gets you off on the right foot!

CK-7 has a switchable -10dB pad for high SPL sources, as well as an 80Hz roll off to eliminate boomy bass frequencies.

The CK- 7 is housed in a beautiful red-painted brass body and comes with a shockmount, wooden storage box and aluminum carrying case.

  • High-end materials
  • 3 polar patters in one mic
  • Solid brass housing
  • -10dB pad switch
  • 80Hz roll-off switch
  • Comes with shockmount
  • Comes with wooden storage box
  • Comes with aluminum carrying box
  • Tested in the USA
  • 5 year warranty

About Avant Electronics

Avantone design each of their microphones to fill a certain niche or perform a certain purpose, so lots of thought and intent goes into each of their models - they aren’t just copying other companies or building run-of-the-mill models.

Avant Electronics is a family run business who’s motto is “affordable excellence”. They are passionate musicians who are also business people, although they refer to their company as a family more often than as a business.

The people at Avant have decades of experience in the music business so they know good gear and good sound, and they also know that with great designs, forward-thinking innovation, and careful quality control, great gear doesn’t have to wipe out your bank account.

Every Avantone mic comes with a 5 year warranty and each mic is carefully checked and tested in the USA - it takes them some extra time but it’s all part of their commitment to excellence (and we suspect they enjoy it maybe just a little bit too).
Type True Condenser
Polar Pattern/s Cardioid , Omni , Figure 8
Frequency Response 20-20,000 Hz +/- 3dB
Output Impedance <=250 Ohms
Maximum SPL 139dB (0.5% THD @1000Hz)
Sensitivity -38 dB (0 dB=1V/Pa)
Equivalent noise level (A-Weighted per IEC 286-4) <16 dB
Output Connector Male XLR 3 pin
High-Pass Switch 80 Hz 6dB/octave
Attenuation Switch -10 dB
Power Requirement Standard 48 Volt Phantom / 5mA
Included Accessories Wooden Box & Shockmount, Metal case
Finish Polished Nickel trim, Metallic wine red body
Weight .65 kgs / 1.4 lbs
Dimensions 187mm x 51mm / 7.5" x 2"


See video clip above.

5 year warranty. For manufacturer support please email:

No Accessories for this product