You have no items in your shopping cart.

Audio-Technica AT4041SP Studio Microphone Pack

  • Retail Price $795.00
  • You Save $296.00
  • Shipping from Add to Cart
  • Availability In Stock
$499.00

Audio-Technica AT4041SP Studio Microphone Pack

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

Save $100 with the AT4041SP Studio Pack! Get two AT4041 studio condenser microphones for $100 off the regular price.

Engineered to meet the most critical acoustic requirements of professional recording, broadcast and live sound, the AT4041 features a smooth, extended frequency response with a slight rise in the high-frequency region and a transformerless output for very high SPL-handling capability. The element back plate holds a fixed charge and has been aged to provide energy stabilization. The surface of the back plate is precision milled to ensure maximum charge linearity, resulting in a reduction in both frequency response peaks and diaphragm break-up distortion.

AT4041SP Studio Pack includes:

Two AT4041 cardioid condenser microphones
Two AT8405a stand clamps
Two AT8159 windscreens
Protective wooden storage case.


About the AT4041 cardioid condenser microphone

  • Smooth, extended frequency response with a slight rise occurring in the high-frequency region
  • Ideal for drum overheads, acoustic guitar, piano, horns and under snare
  • Low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer
  • Transformerless circuitry virtually eliminates low-frequency distortion and provides superior correlation of high-speed transients
  • State-of-the-art design and manufacturing techniques ensure compliance with A-T's stringent consistency and reliability standards
  • Switchable hi-pass filter and rugged turned-brass microphone housing
ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Cardioid
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY -36 dB (15.8 mV), re 1V at 1 Pa
IMPEDANCE 100 ohms
MAXIMUM INPUT SOUND LEVEL 145 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) 121 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 70 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 48V DC, 3.2 mA typical
SWITCH Flat, roll-off
WEIGHT 4.2 oz (120 g)
DIMENSIONS 6.28" (159.5 mm) long, 0.83" (21.0 mm) body diameter
OUTPUT CONNECTOR Integral 3-pin XLRM-type
ACCESSORIES FURNISHED AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; protective carrying case
AUDIO-TECHNICA CASE STYLE S1

There are no demos at this time.

Web


Support for Audio-Technica products can be found at the Audio-Technica Support Page.

No Accessories for this product